Free worldwide shipping on bulk orders over $199

← Back to Blog

Keep filament dry and ready to print

Most filaments absorb moisture from the air. Wet filament causes popping, stringing, rough surfaces and weaker parts. A simple routine keeps every spool ready to print.

Know the signs of wet filament

Listen for crackling at the nozzle and look for fine bubbles or a fuzzy surface finish. Nylon, TPU and PETG show these symptoms first, but PLA is affected too over time.

Dry before you print

A dedicated filament dryer gives the most consistent results because it controls temperature and airflow.

  • PLA: around 50 °C for 4–6 hours
  • PETG: around 65 °C for 4–6 hours
  • TPU and nylon: follow the material data sheet

Store sealed between jobs

Return spools to resealable bags or boxes with fresh desiccant. For materials you use daily, feeding directly from a dryer is the simplest option.

LANDU dryers are designed around this workflow, so you can dry, store and print from the same unit.

Need material advice?

Tell us what you want to print and LANDU will help you choose the right material.