Resin printing has a few more steps than filament printing, but each one is simple. Following the same workflow every time gives you reliable, repeatable results.
Prepare
Shake the resin bottle well, level the build plate and check the vat film for damage. Wear nitrile gloves and work in a ventilated space.
Start with the exposure settings recommended for your resin and printer, then fine-tune with a calibration print.
- Keep the room between 20 and 30 °C
- Avoid over-filling the vat
- Let the first layers bond fully
Finish
Wash parts in IPA or a recommended cleaner, let them dry, then post-cure under UV light. Remove supports before or after curing depending on how brittle the material is.
Keep notes on settings and results for each resin. They will save you time on every future print.



































