Free worldwide shipping on bulk orders over $199

← Back to Blog

TPU basics: printing flexible parts

TPU basics: printing flexible parts

TPU makes it possible to print grips, seals, bumpers and wearable parts. It needs slightly different settings than rigid filaments, but the results are worth it.

Slow and steady

Flexible filament can buckle in the extruder at high speed. Start slowly and increase speed once extrusion is stable.

  • Print around 20–40 mm/s to start
  • Reduce or disable retraction
  • Use a direct-drive extruder if available

Design for flexibility

Wall count and infill control how soft the part feels. Fewer walls and lower infill create a softer part.

Keep it dry

TPU absorbs moisture quickly. Dry it before printing for clean surfaces and good layer bonding.

LANDU TPU-95A is a balanced starting point for most flexible FDM applications.

Need material advice?

Tell us what you want to print and LANDU will help you choose the right material.